Home > Exhibition > Content

How zinc alloy Vibration polishing to a mirror effect

QINGDAO YOSION LABTECH CO., LTD. | Updated: Jan 11, 2016

How zinc alloy polishing vibration mirror effect can be achieved? Conventional grinding and polishing process is generally 240 plus kibble purpose resin grinding stone polishing agents two hours, and then added alumina ceramic polishing stone polishing agent polishing one hour.

Such polishing surface of the product out of the zinc alloy with the naked eye can not see anything wrong, but after a after plating, surface and sometimes there will be some large and small, as well as some minor scarring trachoma.

How can we put an end to these problems? By the Dongguan City Shengying grinding Ltd. Mechanical and practice, we developed a special fine grinding stone a high mesh numbers.


Contact Us

Qingdao Yosion Labtech Co.,Ltd

ADD: No.506 South Shanghai Road, Huangdao District(Jiaonan), Qingdao City

Phone: +8618266641751

Phone: +86-532-83978550

fax: +86-532-83978550

E-mail: annezhang@yosionlabtech.com

Skype: annezhang@yosionlabtech.com

Wbsite:www.yosionlabtech.com  / www.yosionlabtech.com.cn

Copyright © QINGDAO YOSION LABTECH CO., LTD.
Tel: +86-532-83978550
Fax:+86-532-83978550
E-mail:amyli@yosionlabtech.com
Address:No.506 South Shanghai Road,Huangdao District(Jiaonan),Qingdao City,Shangdong,China