Home > News > Content

Multi-Layer Aluminium-Plastic Composite Foil Film Gas Sampling Bag with Metal Fitting 0.3L~6000L Gas Sample Bag Gas Sample Bags

QINGDAO YOSION LABTECH CO., LTD. | Updated: Aug 30, 2016

Basic Info

Model NO.:ALPC61Trademark:OEM

Operation guidelines:
1.Avoid filling pressure higher than 3000Pa (300 mmHg). Fill gas until the bag is fully expanded, however, it is not so tense when you press it using your finger.
2. A latex or silicon rubber hose should be used to connect to the analytical instrument from the gas sample bag; meanwhile a clamp can be used to control the flow.
3. When using a needle to draw gas from highly elastic septum, squeeze the septum with fingers in order to restore the sealing property after pulling out the needle.
4.You can release gas through metal fitting, or draw gas through septum. It's more convenient to flush sample bags with dual fittings.
5.Metal fittings are made of copper-nickel alloy. They can handle non-corrosive organic or inorganic gases.
6. Before use, flush sampling bags three times with the gas you want to fill.
7. Working temperatures should be -20 °C to 60 °C.
8. Keep away from flame and high temperature when filling and storage. Avoid contacting sharp stuff. 



Contact Us

Qingdao Yosion Labtech Co.,Ltd

ADD: No.506 South Shanghai Road, Huangdao District(Jiaonan), Qingdao City

Phone: +8618266641751

Phone: +86-532-83978550

fax: +86-532-83978550

E-mail: annezhang@yosionlabtech.com

Skype: annezhang@yosionlabtech.com

Wbsite:www.yosionlabtech.com  / www.yosionlabtech.com.cn

Tel: +86-532-83978550
Address:No.506 South Shanghai Road,Huangdao District(Jiaonan),Qingdao City,Shangdong,China